Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Control Arm: Service and Repair
Front
REMOVAL
1. Follow removal procedure outlined in the illustration, noting the following.
2. Use special tool to separate upper ball joint.
CAUTION:
1. Use the special tool to loosen the tie rod end mounting nut. Only loosen the nut; do not remove it from the ball joint.
2. Support the special tool with a cord, etc. to prevent it from coming off.
INSPECTION
-
Check the bushings for wear and deterioration.
-
Check the upper arm for bends or damage.
-
Check all bolts for condition and straightness.
INSTALLATION
1. Follow removal procedure in reverse for installation, noting the following.