eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Suspension Strut / Shock Absorber > < Front Coil Spring - Creak/Pop, Or Squeak
Page 2
background image

3.

Install 1 insulator p/n MR272656 starting at the 2nd coil from the top of the spring. Continue installing the insulator down toward the 3rd coil
(Figure 1). Repeat the procedure for the other spring.

4.

Reinstall the strut assemblies into the vehicle and make any necessary adjustments as listed in the applicable service manual.

5.

Test drive the vehicle to verify the repair.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

02-27-02-92 Both Sides

1.1 Hrs.

FAILURE CODE:

P8 - New Part

Suspension Strut / Shock Absorber > < Front Coil Spring - Creak/Pop, Or Squeak