Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Holding the nut at the clutch hose side, loosen the flare nut on the clutch pipe.
Installation Service Point
>A< Clutch Hose / Clutch Pipe Installation
1. Temporarily tighten the clutch pipe flare nut by hand, and then tighten it to the specified torque, being careful that the clutch hose does not become
twisted.
2. After tightening the clutch pipe flare nut, check to be sure there is no leakage of the clutch fluid.
