Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
<B> 1st-2nd Speed Synchronizer Sleeve / 2nd Speed Gear Removal
<C>Taper Roller Bearing Removal
CAUTION:
1. Do not reuse the bearing.
2. Replace the inner and outer races of the taper roller bearing as a set.
INSPECTION
Intermediate Gear
1. Check the outer surface of the intermediate gear where the needle bearing is mounted for damage, abnormal wear and seizure [portion A].
2. Check the splines for damage and wear.
Needle Bearing
1. Combine the needle bearing with the shaft or bearing sleeve and gear and check that it rotates smoothly without abnormal noise or play.