Talon FWD L4-1997cc 2.0L DOHC VIN Y SMFI (1997)
Water Pump: Service and Repair
REMOVAL
1. Drain cooling system.
2. Remove timing belt cover. Refer to Engine.
3. Follow removal steps outlined in illustration, noting the following.
INSTALLATION
1. Follow removal procedure in reverse order noting the following.
CAUTION:
a. Do not allow engine oil or other grease to adhere to the O-ring.
b. When inserting the water pump, check that there is no sand, dirt, etc. on its inner surface.
2. Insert the O-ring to the water pump groove, and coat the circumference of the O-ring with water or engine coolant. By coating with water or engine
coolant, the insertion to the cylinder block will become easier.