Talon FWD L4-1997cc 2.0L DOHC VIN Y SMFI (1997)
11. Use the special tool to install the crankshaft front oil seal into front case.
12. Coat the gear with plenty of engine oil, and align the two timing marks.
13. Set the special tool on the front end of the crankshaft and apply a thin coat of engine oil to the outer circumference of the special tool to install the
front case.
14. Install the front case assembly through a new front case gasket and temporarily tighten the flange bolts (other than those for tightening the filter
bracket).