Talon FWD L4-1997cc 2.0L DOHC VIN Y SMFI (1997)
CAUTION: Do not grease the vent hole in the rack.
10. Cover rack serrations with special tool.
11. Apply Mopar (R) ATF PLUS (Automatic transmission fluid type 71 76)/Automatic transmission Fluid "DEX RON II" on special tool.
12. Match oil seal centre with rack to prevent retainer spring from slipping and slowly insert rack from power cylinder side.
13. Wrap the rack end with plastic tape, apply a coating of Mopar (R) ATF PLUS (Automatic transmission fluid type 7176)/Automatic transmission
Fluid "DEXRON II", and then install the rack bushing and rack stopper.
CAUTION: Do not allow oil seal retainer spring to slip out.
14. Insert circlip to rack stopper hole through cylinder hole. Turn rack stopper clockwise and insert circlip firmly.
CAUTION: Insert circlip to rack stopper hole while turning rack stopper clockwise.
15. Apply a coating of Mopar (R) ATF PLUS (Automatic transmission fluid type 7176)/Automatic transmission Fluid "DEXRON II" to the outside of
the oil seal. Using the special tools, press the oil seal into the valve housing.
