Talon FWD L4-1997cc 2.0L DOHC VIN Y SMFI (1997)
B. Selector knob installation. (3)
1. Put the selector lever in the "N" position, turn the sleeve and adjust the dimension between the sleeve and the end of the lever so it reaches
16 mm (1.02 inch).
2. Install the selector knob.
3. Check that dimension (A) between the detent plate and detent pin reaches the standard value.
Standard value (A): 1.7-2.4 mm (0.067-0.094 inch)
4. If outside the standard value, remove the selector knob and turn the sleeve again to readjust.
