Vision V6-201 3.3L (1993)
15.
Install the revised disc brake adapter to the spindle and torque the 4 attaching bolts to 115 N-m (85 ft.lbs.).
16.
Install the park brake cable and park brake shoe assembly.
17.
If vehicle is equipped with ABS install speed sensor head into disc brake adapter.
18.
Install hub and bearing assembly, washer and retaining nut on spindle, torque to 168 N-m (124 ft.lbs.).
19.
Install hub and bearing assembly nut retainer and cotter pin.
20.
Install braking disc (rotor) on hub.
21.
Install brake caliper over braking disc (rotor) and install on adapter. Torque caliper mounting bolts to 22 N-m (192 in.lbs.).
22.
Repeat procedure on other side of vehicle.
23.
Install wheel and tire assemblies.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
05-85-05-90
1.4 Hrs.
FAILURE CODE: P8 - New Part
