Vision V6-201 3.3L (1993)
Right Frame Rail Ground
Left Frame Rail Ground
3.
Drill a 5/32 inch diameter hole in the general area on the bottom of the rail for easy tool access. Also make sure that once the eyelets and screws
are fastened to the rail that the ground wires will not contact sharp edges or mechanical devices.
4.
Use two PN 00154552 screws to fasten all ground eyelets.
5.
Fasten the screw to the rail with a torque of between 3.6 - 6.2 N-m (32 - 55 in.lbs.).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
08-90-65-97
0.3 Hrs.
FAILURE CODE:
83 - Connection loose
