Vision V6-201 3.3L (1993)
Drive Belt: Customer Interest
A/C Belt - Rolls Over in The Pulleys
NO: 07-05-94
GROUP: Cooling
DATE: Jun. 24, 1994
SUBJECT:
A/C Belt Roll Over
MODELS:
1993-1994 (LH) Concorde/Intrepid/Vision/LHS/New Yorker
NOTE:
THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 3.5L ENGINE BUILT PRIOR TO FEBRUARY 1, 1994 (MDH 02-01-XX).
SYMPTOM/CONDITION:
A/C belt rolls over in the pulleys. Replacing the belt does not permanently correct the condition.
PARTS REQUIRED:
1
4663950
A/C Belt
1
4663534
A/C Idler Pulley
REPAIR PROCEDURE:
This bulletin involves replacing the A/C belt and idler pulley with revised parts.
1.
Remove the generator/power steering pump drive belt to gain access to the air conditioning drive belt.
2.
Loosen the tensioner pulley lock nut and turn the adjusting screw to release the belt tension.
3.
Replace pulley and belt with revised parts. Adjust belt tension by turning adjusting screw. Torque pulley nut to 54 N-m (40 ft.lbs.) after
adjustment.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
07-20-20-91
0.3 Hrs.
FAILURE CODE: P8 - New Part
