Vision V6-201 3.3L (1993)
9. Install evaporator into the lower housing.
10. Install upper housing onto lower housing.
A/C Housing Screws
11. Install screws to retain the upper housing to the lower housing.
12. Install evaporator and vent door seals onto the A/C housing.
Evaporator Probe
13. Install evaporator probe assembly into the housing. Insert probe needle into evaporator.
14. Position the evaporator probe assembly at the housing face. Twist assembly clockwise to lock tab into slot on housing face.
15. Install wiring at evaporator temperature probe.
16. Install blower motor resistor.