Vision V6-201 3.3L (1993)
To install the stub shaft bearing, position new bearing onto the stub shaft. install stub shaft into shop press. Position Special Tool # 6558, or
equivalent above bearing. Press bearing onto shaft.
3. Index the inner differential adjuster with a cross hair as shown.
CAUTION: If short stub shaft has corrosion, use caution when removing differential cover. Inspect seal and shaft for damage after removal of
cover. Replace shaft and/or seal as required.
4. Index outer adjuster. Remove lock bracket and back out adjuster exactly one revolution. Then remove differential cover.
5. Remove The inner adjuster lock bracket. Then remove the inner adjuster.
