Vision V6-215 3.5L SOHC (1995)
Cruise Control Switch: Testing and Inspection
Helpful Information
The vehicle speed control switch is powered by the Powertrain Control Module (PCM). Power for the switch is supplied on circuit V37.
The are two switches used in the system. They are the ON/OFF and the RESUME/ACCELL-SET/COAST switches. These switches use resistors internal
to the switch to change the voltage on the V37 circuit to the PCM when the operator is requesting a function.
Ground for the switches is provided on circuit Z2. This circuit terminates at the Airbag Control Module (ACM) bracket.
Circuits V37 and Z2 are spliced internal to the clockspring to provide power and ground for the two switches.
