Vision V6-215 3.5L SOHC (1995)
34.
Connect the TPS electrical connector (Figure 4).
35.
Connect the MAP sensor electrical connector (Figure 3).
36.
Connect the vacuum hose to the MTV (Figure 2).
37.
Connect the IAC and intake air temperature sensor electrical connectors (Figure 2).
38.
Install the throttle cable and speed control cable into the mounting bracket (Figure 1).
39.
Hold the throttle lever in the wide-open position and install the throttle cable and speed control cable into the lever (Figure 1).
40.
Install the engine cover to the top of the intake manifold plenum.
41.
Install the air inlet plenum behind the manifold and connect the PCV makeup air hose and IAC supply hose (part of the air inlet plenum).
42.
Install the air inlet tube between the air cleaner and the inlet plenum.
Owner Letter
SAFETY RECALL TO REPLACE YOUR VEHICLE'S FUEL RAIL 0-RINGS
AND REINFORCE THE FUEL OUTLET RAIL
Dear DaimlerChrysler Vehicle Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
DaimlerChrysler Corporation has determined that two defects which relate to motor vehicle safety exist in some 1993 through 1997 Chrysler Concorde,
New Yorker and LHS; Dodge Intrepid and Eagle Vision, and 1997 Plymouth Prowler vehicles equipped with a 3.5L engine.
The problems are...
The fuel rail O-rings on your vehicle (identified on the enclosed form) may leak fuel. In addition, the outlet side fuel rail may crack and leak fuel. Fuel
leakage in the presence of an ignition source could result in an engine compartment fire.
What DaimlerChrysler and your dealer will do...
DaimlerChrysler will repair your vehicle free of charge (parts and labor). To do this, your dealer will replace the fuel rail O-rings and reinforce or
replace the fuel outlet rail. The work will take about 1-1/2 hours to complete. However, additional time may be necessary depending on how dealer
appointments are scheduled and processed.
What you must do to ensure your safety...
^
Simply contact your dealer right away to schedule a service appointment. Ask the dealer to hold the parts for your vehicle or to order them before
your appointment.
^
Bring the enclosed Owner Notification Form with you to your dealer. It explains the required service to the dealer.
If you need help...
If you have trouble getting your vehicle repaired, please call the DaimlerChrysler Customer Center, toll free, at 1-800-992-1997. A representative will
assist you in getting your vehicle repaired. If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may
submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 400 Seventh Street, S.W., Washington, DC 20590, or
call the Toll Free Auto Safety Hotline at 1-800-424-9393. Washington, DC area residents may call 1-202-366-0123.
We're sorry for any inconvenience, but we are sincerely concerned about your safety. Thanks for your attention to this important matter.
