Vision V6-3.5L VIN F (1997)
Front Door Panel: Service and Repair
FRONT DOOR TRIM
REMOVAL
CAUTION: Do not pry on door trim panel, damage to trim panel will result.
1
Remove speaker flag.
2
Remove speaker grille by inserting trim tool at the rear of the grille and disengaging clips holding to trim panel. Remove grille
3
Remove trim plug from the remote bezel by inserting a small flat blade tool into the notch and remove, if equipped.
4
Remove three screws from bottom of door.
5
Remove screw in pull cup.
6
Remove screw in remote bezel.
7
Remove two screws in the instrument panel interface area.
8
Remove three screws in the speaker area.
9
Using a trim tool, disengage the retainer clips from the door trim panel to the door panel.
10 Raise trim panel up to disengage from the belt being careful to hold the panel securely.
