Vision V6-3.5L VIN F (1997)
effort will be required to connect the park brake cables to the equalizer.
Park Brake Cable Removal From Floor Pan
16.
Remove rear park brake cable from vehicle floor pan using the following procedure. Disconnect rear park brake cable requiring replacement
from equalizer. Slip the box end of a 1/2 inch over end of park brake cable. This will compress retaining tabs on end of park brake cable
housing. Using a screw driver, press on end of park brake cable housing to remove cable from floor pan of vehicle.
Installation
PROCEDURE
1.
Raise vehicle.
Park Brake Cable Attachment To Park Brake Lever
2.
Install parking brake cable into rear disc brake adapter. Be sure the cable retaining tabs are expanded around mounting hole in brake adapter.
Connect parking brake cable end to brake shoe assembly actuator lever.
3.
Install parking brake cable into cable mounting hole in floor pan of vehicle. Be sure that cable retainers are expanded around mounting hole in
floor pan.
