Vision V6-3.5L VIN F (1997)
Park Brake Cable Attachment To Park Brake Lever
6.
Disconnect park brake cable from park brake lever on rear brake assembly.
Removing Park Brake Cable From Support Plate
7.
Position a 1/2 box wrench over the retainer on the end of the parking brake cable. Compress cable housing retaining fingers and start housing
out of support plate. Remove wrench when retainer is free from the park brake cable mounting hole in the rear brake support plate. Alternate
method is to use a aircraft type hose clamp over housing end fitting compressing the three fingers.
Park Brake Cable Routing Clips
8.
Remove the 4 routing clips attaching rear park brake cable to floor pan and frame of vehicle.
9.
Lower vehicle.
