Vision V6-3.5L VIN F (1997)
Parking Brake Shoe: Service and Repair
REMOVE
1.
Remove rear disc brake caliper assembly from adapter and rotor, refer to Disc Brake System Brake Pad Service and Repair Removal.
2.
Remove rear rotor from rear hub.
3.
Remove dust cap from rear hub.
4.
Remove the cotter pin, nut retainer, wave washer and rear hub/bearing assembly retaining nut and washer from the rear spindle.
5.
Remove rear hub and bearing assembly from rear spindle.
Rear Brake Shoe Hold-Down Clip
6.
Remove rear brake shoe assembly hold down clip.
7.
Turn brake shoe adjuster wheel until adjuster is at shortest length.
Park Brake Shoe Adjuster Assembly
8.
Remove adjuster assembly from the parking brake shoe assemblies.
