Vision V6-3.5L VIN F (1997)
Cruise Control Switch: Service and Repair
Speed Control Switch
REMOVAL
The speed control switch is mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO RESTRAINT SYSTEMS.
1. Turn off ignition.
2. Remove two screws from side of the switch.
3. Rock switch away from airbag and steering wheel.
4. Disconnect two-way electrical connector.
5. Repeat for the other switch.
INSTALLATION
1. For installation, turn off ignition and reverse above procedures.
