Vision V6-3.5L VIN F (1997)
Radiator Cap: Description and Operation
DESCRIPTION
There is a spring-loaded vent valve in the center of the cap that allows the system to pressurize and Repressurize without creating a vacuum. If the
valve is stuck open, coolant will escape to the overflow hose. There is also a gasket in the cap to seal to the top of the filler neck.
OPERATION
The coolant bottle is equipped with a pressure cap which releases pressure at some point within a range of 117 kPa ±7 kPa (17 psi ±1 psi). The
system will operate at higher than atmospheric pressure which raises the coolant boiling point thus allowing increased radiator cooling capacity.
CAUTION: Use only the pressure cap specified for this vehicle. Use of other pressure caps can lead to coolant loss and overheating.
