Vision V6-3.5L VIN F (1997)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
1. Remove fog lamp from vehicle.
2. Remove rear cover from fog lamp.
3. Disengage wire clip holding bulb in fog lamp.
4. Hinge wire clip out of bulb removal path.
Foglamp Bulb
5. Pull bulb from lamp.
6. Disengage wire connector from body wire harness.
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
1. Engage wire connector to body wire harness.
2. Insert bulb into lamp.
3. Hinge wire clip over bulb base.
4. Engage wire clip to hold bulb in fog lamp.
5. Install rear cover to fog lamp.
6. Install fog lamp to vehicle.
7. Verity fog lamp operation and alignment.
