Vision V6-3.5L VIN F (1997)
6. Move the power steering fluid reservoir back into position. Install the power steering cooler line hose on the nipple of the power steering fluid
reservoir. Install the hose clamp on the hose. Be sure clamp is installed on power steering fluid hose past the upset bead on the hose fitting.
7. Position the power steering fluid reservoir on the frame rail. Install the mounting bolt for the power steering fluid reservoir. Tighten the mounting
bolt to a torque of 12 Nm (106 inch lbs.).
8. Install the heat shield for the HCU on the HCU mounting bracket. Install the 2 bolts attaching the heat shield to the HCU mounting bracket.
