Vision V6-3.5L VIN F (1997)
11. Carefully insert a pry bar between lower control arm and steering knuckle. Push down on pry bar to separate ball joint stud from steering knuckle.
CAUTION: The strut assembly to steering knuckle bolts are serrated where they go through assembly and steering knuckle. When removing bolts,
turn nuts off bolts DO NOT TURN BOLTS; IN STEERING KNUCKLE. If bolts are turned damage to steering knuckle will result.
12. Remove the strut assembly to steering knuckle attaching bolts.
13. Remove the steering knuckle from the vehicle.
