Vision V6-3.5L VIN F (1997)
5. Remove rear hub and bearing assembly cotter pin and nut retainer. Remove the hub and bearing retaining nut and washer from the spindle. Then
remove hub and bearing assembly from spindle.
6. On vehicles equipped with rear drum brakes, remove the 4 bolts attaching the rear brake support plate to the spindle. Then remove the rear brake
support plate, with parking the brake cable attached, from the spindle.
7. If vehicle is equipped with antilock brakes, remove the speed sensor head from the rear disc brake adapter.
8. On vehicles equipped with rear disc brakes, remove the 4 bolts attaching the disc brake adapter to the rear spindle. Then remove the adapter, disc
shield, park brake shoes and park brake cable as an assembly from the spindle.
