Vision V6-3.5L VIN F (1997)
6. Remove the lateral links from the spindle.
7. Install a thin open end wrench, on the hex of attaching link stud to keep the stud from turning in link. Then remove nut from stabilizer bar to strut
assembly attaching link stud, at the stabilizer bar. The attaching link does not have to be removed from strut assembly.
8. Loosen and fully remove, the rear spindle to strut assembly pinch bolt.
CAUTION: When inserting center punch into rear spindle, use care so point of center punch does not puncture strut assembly.
