Vision V6-3.5L VIN F (1997)
3. Install the lateral links on the spindle. Tighten the lateral links to spindle attaching bolt to a torque of 140 Nm (105 ft. lbs.).
4. Install stabilizer bar attaching link onto stabilizer bar. Install stabilizer link to stabilizer bar attaching nut. Tighten the stabilizer link to stabilizer bar
attaching nut to a torque of 95 Nm (70 ft. lbs.).
5. Install rear speed sensor cable on rear trailing arm. Then mount speed sensor cable routing clip to the trailing arm to rear spindle bracket.
6. If vehicle is equipped with rear disc brakes, install rear braking disc on hub. Carefully install rear brake caliper over braking disc and install on
adapter. Tighten rear caliper assembly to adapter mounting bolts to 22 Nm (192 inch lbs.). If required, refer to Brakes and Traction Control.
