Aerostar 2WD V6-182 3.0L (1995)
1. Apply a film of clean brake fluid to the new caliper piston seal, and install it in the cylinder bore. Be sure the seal does not become twisted but is
firmly seated in the groove.
2. Coat the wheel cylinder piston wheel cylinder piston with brake fluid. Spread the dust boot over the wheel cylinder piston wheel cylinder piston
seating the dust boot in the caliper piston groove.
3. Install the wheel cylinder piston wheel cylinder piston into the cylinder bore.
4. The dust boot flange should set squarely in the outer groove of the caliper bore when the wheel cylinder piston is completely installed.
5. Install the front disc brake caliper over the rotor.
Tools Required:
^
Air Nozzle Tool-7000-DE
^
Rubber Tip for Air Nozzle Tool-7000-DD
