Aerostar 2WD V6-182 3.0L (1995)
7. Remove the secondary shoe-to-anchor spring using a suitable brake spring removal/installation tool. Using the same tool, remove the primary
shoe-to-anchor spring and unhook the cable anchor. Remove the brake shoe anchor pin guide plate (2028) (if equipped).
8. Remove the cable guide from the secondary shoe.
9. Remove the brake shoe retracting springs (2296) using Hold Down Spring Tool T73T-2300-A; remove the rear brake shoes and linings (2200),
adjusting screw, pivot nut, and brake shoe adjusting screw socket (2048).
