Aerostar 2WD V6-182 3.0L (1995)
Clutch Switch: Testing and Inspection
CLUTCH PEDAL POSITION SWITCH
1. Disconnect wiring from switch, then connect Rotunda 73 Digital Multimeter tool No. 105-00051, or equivalent, across two middle wiring
terminals on switch. Note multimeter reading.
2. Press clutch pedal and note multimeter reading again.
3. Replace clutch pedal position switch if multimeter readings are not as follows:
a. Continuity with clutch pedal released.
b. Open circuit with clutch pedal pressed.
