Aerostar 2WD V6-182 3.0L (1995)
Water Pump: Service and Repair
Installation
NOTE: Lightly oil all bolts and stud threads before installation except those requiring special sealant.
1. Clean gasket surfaces on engine front cover and water pump carefully.
CAUTION: Use care as aluminum gouges easily.
2. Position a new gasket on water pump sealing surface using Gasket and Trim Adhesive to hold gasket in position.
3. Install water pump on engine front cover and hand-tighten 12 attaching bolts. Tighten to specifications on accompanying chart.
4. Reinstall lower radiator hose at water pump and radiator and tighten clamps.