Aerostar 2WD V6-182 3.0L (1995)
Does the test lamp light?
YES
GO to B7.
NO
CHECK circuit 158 (BK/PK) back to key-in-ignition switch. SERVICE as required. REPEAT B6.
B7 - Check For Voltage At Circuit 159 (R/PK)
-
Connect a 12-volt test lamp between circuit 159 (R/PK) in warning chime/buzzer connector and a known ground.
-
Open door.
Does the test lamp light?
YES
GO to B8 or B12, as appropriate.
NO
CHECK circuit 159 (R/PK) back to driver's door lamp switch. SERVICE as required. REPEAT B7 .
B8 - Check For Voltage At Circuit 14 (BR) (Only For Vehicles Without Autolamp Or Without Electronic Cluster)
-
Connect a 12-volt test lamp between circuit 14 (BR) and a known good ground.
-
Pull headlamp switch on.
Does the test lamp light?
YES
GO to B10 or B12, as appropriate.
NO
CHECK circuit 14 (BR) back to headlamp switch. SERVICE as required. REPEAT B8.
B9 - For Autolamp Vehicles Only Check For Ground At Circuit 158 (BK/PK)
-
Open dnvers door.
-
Connect a 12-volt test lamp between circuit 158 (BK/PK) and 159 (R/PK) in warning chime connector.
-
Pull headlamp switch on.
Does the test lamp light?
YES
GO to B11.
NO
CHECK circuit 158 (BK/PK) back to headlamp switch. SERVICE as required. REPEAT B9.
B10 - Check For Voltage At Circuit 296 (W/P) (Electronic Instrument Cluster Only)
-
Connect a 12-volt test lamp between circuit 296 (W/P) in warning chime connector and ground.
-
Turn ignition switch to the ACC posiUon.
Does the test lamp light?
YES
GO to B11.
NO
CHECK circuit 296 (W/P) back to ignition switch. SERVICE as required. REPEAT B10.
B11 - Check For Ground At Circuit 183 (T/Y) (Electronic Instrument Cluster Only)
-
Connect a 12-volt test lamp between circuit 183 (T/Y) and circuit 296 (W/P) of warning chime connector.
-
Turn ignition switch to ACC position and press a button on message center keyboard.
Does the test lamp light momentarily?
YES
GO to B12.
NO
REFER to instrument cluster testing.
B12 - Check Warning Chime Module Operation
-
Connect warning chime module.
-
Check for proper operation of:
-
Safety belt waming
-
Key in ignition warning
-
Headlamp switch on warning
-
Electronic instrument cluster beep tone
