Aerostar 2WD V6-182 3.0L (1995)
Wheel Bearing: Adjustments
1. Raise and support front of vehicle.
2. Remove wheel cover, grease cap, cotter pin and retainer.
3. Loosen adjusting nut three turns, then rock wheel assembly in and out several times to obtain sufficient clearance between rotor and brake linings.
4. Rotate wheel assembly while torquing adjusting nut to 17-25 ft lb.
5. Loosen adjusting nut 1/2 turn, then retorque adjusting nut to 18-20 in lb.
6. Install retainer and cotter pin. Bend pin ends around castellated flange of retainer.
7. Ensure wheel rotates freely, install grease cap and wheel cover, then lower vehicle.
