Aerostar 2WD V6-182 3.0L (1995)
Fuel Pump Relay: Service and Repair
REMOVAL and INSTALLATION
1. Disconnect battery ground cable.
NOTE: When the battery has been disconnected and reconnected. some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns it adaptive strategy. The vehicle may need to be driven 16km (10 miles) to relearn the strategy.
2. Open power distribution box.
3. Unplug and remove fuel pump relay from socket 7.
4. Plug in new fuel pump relay.
5. Close power distribution box cover.
6. Reconnect battery ground cable.
7. Turn On ignition switch without starting engine and listen for fuel pump operation.