Aerostar 2WD V6-182 3.0L (1995)
5. Make a "U" shaped cut in the carpet to allow access to the tether bracket.
6. Reposition the rear carpet and filler panel. Reinstall the rear floor scuff plate. Reinstall the spare tire by following the instructions found in the
owner's guide.
WARNING
-
THE THREADED HOLE IN THE TETHER ANCHOR HAS AN 8 MM METRIC THREAD. A WRENCH WILL BE NEEDED TO
TIGHTEN THE 8 MM BOLT TO THE REQUIRED TORQUE. SOME CHILD RESTRAINTS COME WITH A NON-METRIC
BOLT WITH A DIFFERENT THREAD. DO NOT USE A NON-METRIC BOLT AS IT MAY BE IMPOSSIBLE TO SCREW IT
ALL THE WAY INTO THE HOLE, RESULTING IN INADEQUATE RETENTION OF THE CHILD RESTRAINT. USE ONLY
THE METRIC ANCHOR BOLT SUPPLIED IN THIS KIT. IF YOU NEED A REPLACEMENT METRIC BOLT OR
ASSISTANCE, ANY FORD DEALER WILL BE HAPPY TO ASSIST YOU.
-
IF THE ANCHOR BOLT(S) ARE EVER REMOVED, THE HOLE(S) IN THE FLOOR MUST BE SEALED TO PREVENT THE
POSSIBILITY OF EXHAUST FUMES ENTERING THE PASSENGER COMPARTMENT.
7. Follow the child seat manufacturer's instructions to attach the tether strap to the tether bracket.
From Underneath the Vehicle
