Aerostar 2WD V6-182 3.0L (1995)
NOTE: The bilingual (English/French) CAUTION statement is shown on the CAUTION labels attached to the upper portion of the safety belts.
CAUTION: Do not use seat belt for support when it is attached to rear seat shoulder belt hook. The rear seat shoulder belt hook may break and you may
fall.
Removal
NOTE:
-
Prior to vehicle delivery, customers must be shown the locations of the detachable anchors, their usage and the proper use of the rear seat shoulder
strap hook.
-
Safety belt must be detached when removing rear seat. Rear seat shoulder safety belts should remain engaged in detachable anchors, except when
the rear seat assembly is removed.
WARNING: WHEN INSTALLING A REAR SEAT IN THE VEHICLE, INSTALL THE REAR SEAT IN ITS ORIGINAL LOCATION.
IMPROPER INSTALLATION OF THE SEAT WILL PREVENT CORRECT USE OF THE SHOULDER SAFETY BELTS. IMPROPER USE
OF THE SAFETY BELTS COULD INCREASE THE RISK AND/OR SEVERITY OF INJURY AND ACCIDENTS.
1. Disengage belt from seat by inserting key or small screwdriver into slot located in detachable anchor.
2. Lift screwdriver up and disengage belt.
3. Whenever a rear seat has been removed, the tongue end of the detachable anchor must be on the rear shoulder belt hook. Refer to illustration.
Installation
