Aerostar 2WD V6-182 3.0L (1995)
1. Grasp the belt tongue and pull down on the belt webbing closest to you to form a loop through the upper (narrow and longer) slot in the tongue.
2. Working within the upper slot, rotate and fold the belt webbing over itself as required to remove the twist.
3. Pull the excess belt webbing back through the upper slot in the tongue.
4. Repeat the above steps to complete the removal of the twist at the lower (wider and larger) slot in the tongue.
5. When completed, the safety belt should look like the above illustration.
Safety Belt Twisted at Safety Belt Guide
