Aerostar 2WD V6-182 3.0L (1995)
Clutch: Service and Repair
One-Way Clutch, A/T
REMOVAL
NOTE: Models with 4.0L engines use a sprag type one-way clutch that should not be disassembled.
1. Remove snap ring using a screwdriver, then lift out cage with springs and bearing as an assembly.
2. Inspect inner and outer races for scores or damaged surfaces where rollers contact races.
3. Inspect rollers and springs for excessive wear or damage, then the spring and roller cage for bent or damaged spring retainers.
INSTALLATION
1. Install cage with springs, then insert bearing rollers one by one and install snap ring.