Aerostar 2WD V6-182 3.0L (1995)
Valve Body: Service and Repair
Disassembly and Assembly
Main Control Valve Body
Disassembly
1. Remove three Torx head screws retaining valve body separating plate and control valve body to case gasket to valve body.
2. Remove the valve body separating plate. This plate is not serviced separately.
Valve Body, Gasket, Separator Plate
3. Remove the main control to case gasket and separator to main control gasket. Replace with new main control to case gasket and separator to main
control gasket.