Aerostar 2WD V6-182 3.0L (1995)
Clutch Release Bearing: Service and Repair
REMOVAL
1. Remove transmission.
Slave Cylinder And Release Bearing
2. Twist the release bearing and carrier assembly until resistance is felt.
3. Turning assembly farther allows preload spring to push bearing assembly off the slave cylinder.
INSTALLATION
1. Lubricate bearing bore and bearing carrier with Ford Premium Long-Life Grease XG-1-C or -K (ESA-M1C75-B) or equivalent.
2. Install release bearing assembly to clutch slave cylinder by pushing into place.
3. Reinstall transmission.