ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Band Apply Servo, A/T > < Converter Clutch Override Solenoid <--> [Torque Converter Clutch Solenoid, A/T]|Locations|Page 3808

Aerostar 2WD V6-183 3.0L (1991)

Page 1
background image

Band: Adjustments

OVERDRIVE AND INTERMEDIATE BAND ADJUSTMENT

1. Remove and discard locknut.

2. Install new locknut.

3. Tighten adjusting screw to 10 ft. lbs.

4. Back off two turns each for overdrive and intermediate band.

5. Hold screw and tighten locknut.

Band Apply Servo, A/T > < Converter Clutch Override Solenoid <--> [Torque Converter Clutch Solenoid, A/T]|Locations|Page 3808