Aerostar 2WD V6-245 4.0L (1990)
Ultrabase 7 Basecoat/Clearcoat or Ultra One Stage Acrylic Urethane Enamel
PREPARATION
1.
Wash the material with a mild detergent and wipe dry.
2.
Solvent wash with R7 K 156 and wipe dry.
3.
Clean with a tack cloth.
4.
Apply desired system with correct amount of Multi-flex, V6 V 299.
TOPCOATING
Prepare topcoating as follows:
^
S-W Ultra One Stage: (Mono-coat)
4 Parts Color
3 Parts SSR 650 Reducer
1 Part V6 V 440 or SSH 520
2 Parts V6 V 299
^
S-W UB7 Basecoat:
8 Parts Basecoat Color
8 Parts Stabilizer
1 Part V6 V 299
^
S-W UB7 Clearcoat:
4 Parts T1 C 650 Clearcoat
2 Parts T1 C 650 Reducer
1 Part CCH 690
1 Part V6 V 299
^
S-W Ultra One Stage: (Mono-coat)
Apply 2-3 medium wet coats at 50 PSI
^
UB7 Basecoat:
Apply 2-3 medium coats at 45 PSI
^
UB7 Clearcoat:
Apply 2-3 medium coats at 50 PSI
DUPONT PRODUCTS
DUPONT CRONAR POLYOXITHANE MONOCOAT SYSTEM
PREPARATION
1.
Wash the surface thoroughly with a mild detergent.
2.
Clean with Prep Sol.
TOPCOATING
1.
Add 8 parts of Cronar single stage enamel.
2.
Add 1 part Cronar initiator 9404S.
3.
Add two parts of (9475S, 9485S, or 9495S,) depending on shop temperature.
4.
Add 2 parts flex-additive 9250S.
5.
Mix thoroughly.
6.
Spray at 45-55 PSI at the gun, 2-3 medium wet coats or until hiding.
