ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Proportioning/Combination Valve > < Brakes - False or Dropping Pedal
Page 1
background image

Brake Hose/Line: All Technical Service Bulletins
Brake Hoses - Wet Appearance

Article No. 91-18-9
09/05/91

^

BRAKES-HYDRAULIC-RUBBER BRAKE HOSES ARE WET FROM SWEATING

^

BRAKES-HYDRAULIC-RUBBER HOSES-FLUID LEAK TESTING PROCEDURE

LIGHT TRUCK:

1985-90 BRONCO II
1985-92 BRONCO, ECONOLINE, F-150, F-250, F-350, RANGER 
1986-92 AEROSTAR 
1988-92 F SUPER DUTY, F-47, F-63, F-59 
1991-92 EXPLORER

This TSB article is being republished in its entirety to include 1992 model vehicles.

ISSUE:

The wet appearance of the outer cover of rubber brake hoses is called "sweating." This is a normal condition for neoprene rayon braid hose.
The "sweating" condition is not evidence of a brake fluid leak and will not result in a loss of pressure in the system.

ACTION:

No action is required for a normal "sweating" brake hose. However, to test for a hydraulic fluid leak, proceed as follows:

1.

Check the brake fluid level in the master cylinder. If necessary, add brake fluid.

2.

Wipe off the hose(s) in question with a clean cloth and an all purpose cleaner, then dry.

3.

With the engine running, fully depress the brake twice and hold for two (2) minutes.
^

If the pedal goes down, check all of the connections for leaks and repair as required.

^

If the pedal goes down and no visible leaks are seen, then the master cylinder is leaking internally and must be replaced or rebuilt. Refer to
the appropriate Light Truck or Medium/Heavy Truck Shop Manual, Section 6 or 12 (Light Truck) and Section 12 (Med./Hvy Truck) for
service details.

OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES:

90-11-9

WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:

301000

Brake Proportioning/Combination Valve > < Brakes - False or Dropping Pedal