Aerostar 2WD V6-245 4.0L (1990)
service, the Form 1864 must be completely filled out and signed by authorized dealer personnel. Mail the second copy of
the Form 1864 for reimbursement.
It is important that all claims be filed for all completed units so that you will be reimbursed and our records will show completion.
Parts and Labor Informaiton, Attachment II
Attachment II
SAFETY RECALL 88S77
AEROSTAR HYDRAULIC BRAKE MASTER CYLINDER
LABOR ALLOWANCES
Inspect master cylinder for Blue spot of paint
0.2 Hrs. - Insert in Box "A" on Form 1864
Install Master Cylinder (includes Inspection)
0.7 Hrs. - Insert in Box "B" on Form 1864
NOTE:
Add 0.1 hour Administrative Allowance to the total repair time.
PARTS REQUIREMENTS
FIES is direct shipping replacement master cylinders to each involved dealer and affiliate. The supply, as a percentage of the total vehicles shown on the
respective dealer reports (vehicle lists), will be 10% for locations with moderate ambient temperatures and 25% for locations with cold ambient
temperatures. If additional parts are needed, do not order recall parts from FPSD International Distribution Operations, Windsor. Order all additional
requirements directly from Wixom using the mailing address on page No. 1 of this Bulletin. For more urgent handling, use cable address "RECALLS -
FORDEX, WIXOM, MICHIGAN". For locations having telex facilities, our telex Ford private line code is FED and commercial telex code is 669777
answerback Ford FIES WIX. Our telephone number in Wixom, Michigan, is area code (313) 344-5643 and Rapifax number is (313) 344-5647. Please
give the part number, description, quantity and recall number when ordering.
PART NUMBER
DESCRIPTION
CLASS
F09Z-2140-C
MASTER CYLINDER
BG
Regular Length
ASSEMBLY
Body Style
(Blue Paint Dot)
F09Z-2140-D
MASTER CYLINDER
BG
Extended Length
ASSEMBLY
Body Style
(Blue Paint Dot)
Technical Instructions, Attachment III
Attachment III
SAFETY RECALL 89S77
AEROSTAR HYDRAULIC BRAKE MASTER CYLINDER
TECHNICAL INSTRUCTIONS
INSPECT FOR BLUE DOT OF PAINT ON MASTER CYLINDER
Inspect the master cylinder for a BLUE dot of paint on the front of the cylinder casting. Cylinders with this BLUE dot of paint are NOT to be replaced
under this recall (factory installed certified part). Master cylinders having any color except BLUE should be replaced.
REPLACE MASTER CYLINDERS WITHOUT BLUE DOT OF PAINT ON CASTING
Before servicing master cylinder, protect all wiring, electrical components and/or plastic parts from brake fluid spillage.
Remove and replace brake master cylinder and bleed brake system. Follow procedure in 1990 Aerostar/Ranger/Bronco II Truck Shop Manual (Page
06-06-7 Brake Actuation - Hydraulic) for master cylinder removal and installation.