ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Nylon Fuel Lines - Servicing Procedure|Page 3019 > < Nylon Fuel Lines - Servicing Procedure|Page 3017
Page 2
background image

Fuel Filler System

FUEL TANK FILLER NECK 

To prevent accidental filling with other than unleaded fuel, vehicles that require unleaded fuel have a special filler tube. This filler tube has a restriction
in it so that the only nozzles that can be inserted are the smaller diameter nozzles of pumps dispensing unleaded fuel.

It is recommended that the amount of fuel put in the tank when filling be limited to the automatic pump shutoff. Due to the expansion of fuel during
temperature increases, or overfilling ("topping off") can cause fuel overflow at the filler cap when the vehicle is standing or the cap is removed. If the
vehicle has two tanks, use fuel from both tanks after fill-up to reduce fuel levels.

Orifice Rollover Valve

Nylon Fuel Lines - Servicing Procedure|Page 3019 > < Nylon Fuel Lines - Servicing Procedure|Page 3017