Aerostar 2WD V6-245 4.0L (1990)
Ignition Coil: Service and Repair
Removal
1.
Disconnect negative battery cable, then the electrical harness connector from the coil pack.
2.
Remove spark plug wires by squeezing locking tabs to release coil boot retainers.
3.
Remove coil pack mounting screws, then the coil pack.
Installation
1.
Install coil pack and mounting screws. Torque screws to 22-31 lbs.
2.
Connect spark plug wires, then the coil pack electrical connector.
3.
Connect negative battery cable.