ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 2423 > < Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 2421
Page 18
background image

Charts, For Vehicle
Application.

912507U

Service Kit Install -

1.2 Hr.

Aerostar, Econoline -
Refer To Service Procedure
Application Charts - For
Vehicle Application.

DEALER CODING

BASIC PART NO.

CONDITION CODE

9E926

49

OASIS CODES:

602300, 607000, 607400, 607700, 608400, 611500, 618400

Technical Service Bulletin # 91257

Date: 911213

Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up

Article No. 
91-25-7

12/13/91

^

HARD COLD START - DURING INITIAL START-UP, IDLE OR DECEL - EFI ENGINES - SLUDGE IN THROTTLE BODY AND/OR
IDLE AIR BY-PASS VALVE

^

HESITATION/STALLS - DURING INITIAL START-UP, IDLE OR DECEL - EFI ENGINES - SLUDGE IN THROTTLE BODY
AND/OR IDLE AIR BY-PASS VALVE

FORD:

1983-87 EXP 
1983-91 ESCORT 
1984-90 MUSTANG, THUNDERBIRD 
1986-90 TAURUS 
1986-91 CROWN VICTORIA 
1988-90 TEMPO

LINCOLN-MERCURY:

1983-85 LN7
1983-87 LYNX 
1984-88 CAPRI 
1984-90 COUGAR 
1986-90 CONTINENTAL, MARK VII, SABLE 
1986-91 GRAND MARQUIS, TOWN CAR 
1988-90 TOPAZ 
1991 TRACER

LIGHT TRUCK:

1985-90 BRONCO II, BRONCO
1985-91 ECONOLINE, F-150-350 SERIES 
1985-92 RANGER 
1986-91 AEROSTAR 
1991 EXPLORER

ISSUE:

Hard cold starts, hesitation and stalls on initial start-up or during idle or decel may be caused by sludge in the throttle body and/or idle
by-pass valve. Sludge deposits or oil film on the throttle body bore and plate or the idle air by-pass valve may cause one or more of the
following conditions.

^

Hard Cold Start

^

Stall On Initial Start-Up

^

Stall During Idle

^

Stall During Decel

^

Rough Idle

^

Rolling Idle

Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 2423 > < Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 2421