Aerostar 2WD V6-245 4.0L (1990)
Headlamp Dimmer Switch: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove steering wheel.
3.
On models equipped with tilt column, remove upper extension shroud by depressing top and bottom of shroud to releasing retaining plate.
4.
On all models, remove two screws attaching steering column trim shroud halves.
5.
Remove ignition lock.
6.
Grasp turn signal switch lever, then twist and pull outward to remove from switch.
7.
Remove steering column shroud.
8.
Peel back foam from turn signal switch, then disconnect switch electrical connectors.
9.
Remove turn signal switch attaching screws, then the switch.
10.
Disconnect electrical connectors from turn signal switch.
11.
Reverse procedure to install.
