ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Ignition Switch:|932410 > < Recall - Ignition Switch Replacement|Page 602
Page 7
background image

Call your dealer promptly. Ask for a service date for Safety Recall 95S28. Also ask your dealer to check the OASIS system for any other service actions
that are open on your vehicle. If your dealer does not have the parts in stock, they can be ordered before scheduling your service date. Parts would be
expected to arrive within a week.

When you bring your vehicle in, show the dealer this letter. If you misplace this letter, your dealer will still do the work, free of charge.

Changed Your Name, Address, or Sold the Vehicle?

If you have changed your name or address, or have sold the vehicle, please complete the enclosed prepaid postcard. Sign and date it, and mail the card to
Ford.

If you have leased this vehicle to another person or organization, please immediately notify the lessee of this recall.

Contact the Ford "Customer Assistance Center" at the address identified in the letterhead of this letter if any further help is needed. Please identify your
vehicle's serial number in any correspondence.

We regret the inconvenience this service may cause you. We want you to have the work done for your safety and satisfaction with your Ford-built
vehicle.

Dealer Information

December 22, 1995

To: All Ford of Canada Dealers

Attention: 
Dealer Principal
Service Manager
Parts Manager

Subject: 
Safety Recall 95828 - Ignition Switch Replacement - Parts Return Revision

Effective with work performed January 2, 1996 we request your assistance to return ALL ignition switches replaced under the recall. Due to the volume
of vehicles affected, we request that you accumulate your daily switch replacements and assemble as a separate shipment. Send collect via LOOMIS, in
the normal manner, to the Warranty Parts Evaluation Centre at Oakville.

NOTE:

^

All returned switches MUST HAVE a completed Warranty Tag (Form 5553-2) attached.

^

We request that all the information on the Tag be filled in and IN ADDITION we request that you also identify the model year and vehicle line at
the top of the tag (i.e. 1990 Mustang).

^

Annotate "Reason for replacement" as "RECALL 95S28".

^

Please note that no facsimile, for part return, will be generated.

This return requirement will be in effect until further notice. It will aid the Company in its continuing investigation of ignition switch concerns. Your
assistance in this matter is appreciated.

All Technical Service Bulletins for Ignition Switch:|932410 > < Recall - Ignition Switch Replacement|Page 602