Aerostar 2WD V6-245 4.0L (1990)
Control Valve Body Identification
b. Insert correct length bolts into holes A and B to position control valve body in case.
c. Insert remaining bolts, except filter and 3-4 shift solenoid retainer bolts, and torque to 71-97 in lbs.
NOTE: 3-4 shift solenoid retainer must be on outside of metal of inner retainer.
d. Remove bolt from hole A and install detent spring to bolt, then reassemble and torque bolts A and B to 71-97 in lbs.
e. Torque oil pan attaching bolts to 98-115 in lbs.